ZSHBUILTINS (1)
zsh built-in functions
DESCRIPTIONS
- simple command
See the secion PRECOMMAND MODIFIERS in zshmisc(1).
. file [ arg ... ]
Read commands from file and execute them in the current shell
environment.
If file does not contain a slash, or if PATH_DIRS
is set, the shell looks in the components of path to find the
directory containing file.
Files in the current directory are not read unless "." appears
somewhere in path.
If any arguments arg are given,
they become the positional parameters; the old positional
parameters are restored when the file is done executing.
The exit status is the exit status of the last command executed.
: [ arg ... ]
This command only expands parameters. A zero exit code is returned.
alias [ -gmrL ] [ name[=value] ] ...
For each name with a corresponding value, define an alias
with that value. A trailing space in value causes the next word
to be checked for alias substitution. If the -g flag is present,
define a global alias; global aliases are expanded even if they do not
occur in command position. For each name with no value,
print the value of name, if any. With no arguments, print all
currently defined aliases. If the -m flag is given the arguments
are taken as patterns (they should be quoted to preserve them from being
interpreted as glob patterns) and the aliases matching these patterns
are printed. When printing aliases and the -g or -r flags
are present, then restrict the printing to global or regular
aliases, respectively. If the -L flag is present, then print each
alias in a manner suitable for putting in a startup script. The exit
status is nonzero if a name (with no value) is given for
which no alias has been defined.
autoload [ name ... ]
For each of the names (which are names of functions),
create a function marked undefined.
The fpath variable will be searched to find the
actual function definition when the function is first referenced.
The definition is contained in a file of the same name as the
function. If the file found contains a standard definition for the
function, that is stored as the function; otherwise, the contents of
the entire file are stored as the function. The latter format allows
functions to be used directly as scripts.
bg [ job ... ]
job ... &
Put each specified job in the background,
or the current job if none is specified.
bindkey -mevd
bindkey -r in-string ...
bindkey [ -a ] in-string [ command ] ...
bindkey -s [ -a ] in-string out-string ...
The -e and -v options put the keymaps in emacs mode or vi mode
respectively; they cannot be used simultaneously. The -d option resets
all bindings to the compiled-in settings. If not used with options -e
or -v, the maps will be left in emacs mode, or in vi mode if the
VISUAL or EDITOR variables exist and contain the string "vi".
Metafied characters are bound to self-insert by default. The -m option
loads the compiled-in bindings of these characters for the mode determined by
the preceding options, or the current mode if used alone. Any previous bindings
done by the user will be preserved. If the -r option is given, remove
any binding for each in-string. If the -s option is not
specified, bind each in-string to a specified command. If no
command is specified, print the binding of in-string if it is
bound, or return a nonzero exit code if it is not bound. If the -s
option is specified, bind each in-string to each specified
out-string. When in-string is typed, out-string will be
pushed back and treated as input to the line editor. This process is recursive
but, to avoid infinite loops, the shell will report an error if more than 20
consecutive replacements happen. If the -a option is specified, bind
the in-strings in the alternative keymap instead of the standard one.
The alternative keymap is used in vi command mode.
It's possible for an in-string to be bound to something and also be the
beginning of a longer bound string. In this case the shell
will wait a certain time to see if more characters are typed and if not it
will execute the binding. This timeout is defined by the KEYTIMEOUT
parameter; its default is 0.4 sec. No timeout is done if the prefix string is
not bound.
For either in-string or out-string, control characters
may be specified in the form ^X, and the backslash may
be used to introduce one of the following escape sequences:
\ea
\en
\eb
\et
\ev
\ef
\er
\ee, \eE
\eNNN
\exNN
character code in hexadecimal
\eM-xxx
character or escape sequence with meta bit set. The `-' after the `M' is
optional.
\eC-X
control character. The `-' after the `C' is optional.
In all other cases, \e escapes the following character. Delete is
written as `^?'. Note that `\eM^?' and `^\eM?' are not the same.
Multi-character in-strings cannot contain the null character ("^@" or
"^ "). If they appear in a bindkey command, they will be silently translated
to "\eM-^@". This restriction does not apply to out-strings,
single-character in-strings and the first character of a multi-char
in-string.
break [ n ]
Exit from an enclosing for, while,
until, select, or repeat loop. If n
is specified, then break n levels instead of just one.
builtin name [ args ] ...
Executes the builtin name, with the given args.
bye
cd [ arg ]
cd old new
cd \(+-n
Change the current directory. In the first form, change the
current directory to arg, or to the value of HOME if
arg is not specified. If arg is -, change to the
value of OLDPWD, the previous directory.
If a directory named arg is not found in the current directory
and arg does not begin with a slash,
search each component of the shell parameter cdpath.
If the option CDABLEVARS is set, and a parameter named arg
exists whose value begins with a slash, treat its value as
the directory.
The second form of cd substitutes the string new
for the string old in the name of the current directory,
and tries to change to this new directory.
The third form of cd extracts an entry from the directory
stack, and changes to that directory. An argument of the form
+n identifies a stack entry by counting from the left
of the list shown by the dirs command, starting with zero.
An argument of the form -n counts from the right.
If the PUSHD_MINUS option is set, the meanings of +
and - in this context are swapped.
chdir
command simple command
See the secion PRECOMMAND MODIFIERS in zshmisc(1).
compctl
Compctl has it's own man page. Check zshcompctl(1).
continue [ num ]
Resume the next iteration of the enclosing
for, while, until, select, or
repeat loop. If n is specified, break out of
n - 1 loops and resume at the nth enclosing loop.
declare [ arg ... ]
dirs [ -v ] [ arg ... ]
With no arguments, print the contents of the directory stack.
If the -v option is given, number the directories
in the stack when printing.
Directories are added to this stack with the pushd command,
and removed with the cd or popd commands.
If arguments are specified, load them onto the directory stack,
replacing anything that was there, and push the current directory
onto the stack.
disable [ -afmr ] arg ...
Disable the hash table element named arg temporarily. The default
is to disable builtin commands. This allows you to use an external
command with the same name as a builtin command. The -a option
causes disable to act on aliases. The -f option causes
disable to act on shell functions. The -r options causes
disable to act on reserved words. Without arguments all disabled
hash table elements from the corresponding hash table are printed.
With the -m flag the arguments are taken as patterns (should be
quoted to preserve them from being taken as glob patterns) and all hash
table elements from the corresponding hash table matching these patterns
are disabled. Disabled objects can be enabled with the enable
command.
disown [ job ... ]
job ... &|
job ... &!
Remove the specified jobs from the job table; the shell will
no longer report their status, and will not complain if you
try to exit an interactive shell with them running or stopped.
If no job is specified, use the current job.
echo [ -neE ] [ arg ... ]
Write each arg on the standard output, with a space separating
each one.
If the -n flag is not present, print a newline at the end.
echo recognizes the following escape sequences:
\ea
\eb
\ec
don't print an ending newline
\ee
\ef
\en
\er
\et
\ev
\e\e
\e0NNN
character code in octal, with a maximum of three digits after the
zero; a non-octal digit terminates the number
\exNN
character code in hexadecimal, with a maximum of two digits after the
`x'; a non-hexadecimal digit terminates the number.
The\ -E falg or the BSD_ECHO option can be used to disable
these escape sequences. In the later case -e flag can be used to
enable them.
echotc cap [ arg ... ]
Output the termcap string corresponding to the capability
cap, with optional arguments.
emulate [ -R ] [ zsh | sh | ksh | csh ]
Set up zsh options to emulate the specified shell as much as possible.
csh
will never be fully emulated.
If the argument is not one of the shells listed above,
zsh
will be used as a default. If the -R option is given, all options
are reset to their default value corresponding to the specified emulation
mode.
enable [ -afmr ] arg ...
Enable the hash table element named arg, presumably disabled
earlier with disable. The default is to enable builtin commands.
The -a option causes enable to act on aliases. The -f
option causes enable to act on shell functions. The -r
option causes enable to act on reserved words. Without arguments
all enable hash table elememts from the corresponding hash table are
printed. With the -m flag the arguments are taken as patterns
(should be quoted) and all hash table elements from the corresponding
hash table matching these patterns are enabled. Enabled objects can be
disabled with the disable builtin command.
eval [ arg ... ]
Read the arguments as input to the shell and execute the resulting
command(s) in the current shell process.
exec simple command
See the secion PRECOMMAND MODIFIERS in zshmisc(1).
exit [ n ]
Exit the shell with the exit code specified by n; if none
is specified, use the exit code from the last command executed.
An EOF condition will also cause the shell to exit, unless
the IGNOREEOF option is set.
export [ name[=value] ... ]
The specified names are marked for automatic export
to the environment of subsequently executed commands.
export is equivalent to typeset -x.
false
Do nothing and return an exit code of 1.
fc [ -e ename ] [ -nlrdDfEim ] [ old=new ... ] [ first [ last ] ]
fc -ARWI [ filename ]
Select a range of commands from first to last from the
history list.
The arguments first and last may be specified as a
number or as a string. A negative number is used as an offset
to the current history event number.
A string specifies the most recent event
beginning with the given string.
All substitutions old=new, if any, are then performed
on the commands.
If the -l flag is given, the resulting commands are listed on
standard output.
If the -m flag is also given the first argument is taken as a
pattern (should be quoted) and only the history events matching this
pattern will be shown.
Otherwise the editor program ename is invoked on a file containing
these history events. If ename is not given, the value
of the parameter FCEDIT is used. If ename is "-",
no editor is invoked. When editing is complete, the edited
command(s) is executed.
If first is not specified, it will be set to -1 (the most recent
event), or to -16 if the -l flag is given.
If last is not specified, it will be set to first,
or to -1 if the -l flag is given.
The flag -r reverses the order of the commands and the
flag -n suppresses command numbers when listing.
Also when listing, -d prints timestamps for each command, and
-f prints full time-date stamps. Adding the -E flag
causes the dates to be printed as `dd.mm.yyyy',
instead of the default `mm/dd/yyyy'.
Adding the -i flag causes the dates to be printed
as `yyyy-mm-dd', in a fixed format.
With the -D flag, fc prints elapsed times.
fc -R reads the history from the given file,
fc -W writes the history out to the given file,
and fc -A appends the history out to the given file.
fc -AI (-WI) appends (writes) only those
events that are new since last incremental append (write) to
the history file. In any case the file will have no more than SAVEHIST
entries.
fg [ job ... ]
job ...
Bring the specified jobs to the foreground.
If no job is specified, use the current job.
functions [ \(+-tum ] [ name ... ]
Equivalent to typeset -f.
getln name ...
Read the top value from the buffer stack and put it in
the shell parameter name. Equivalent to
read -zr. The flags -c, -l, -A,
-e, -E, and -n are supported, too.
getopts optstring name [ arg ... ]
Checks arg for legal options. If arg is omitted,
use the positional parameters. A valid option argument
begins with a + or a -. An argument not beginning with
a + or a -, or the argument --, ends the options.
optstring contains the letters that getopts
recognizes. If a letter is followed by a `:', that option
is expected to have an argument. The options can be
separated from the argument by blanks.
Each time it is invoked, getopts places the option letter it finds
in the shell parameter name, prepended with a + when
arg begins with a +. The index of the next arg
is stored in OPTIND. The option argument, if any,
is stored in OPTARG.
A leading : in optstring causes getopts to store the
letter of the invalid option in OPTARG, and to set name
to `?' for an unknown option and to `:' when a required option
is missing. Otherwise, getopts prints an error
message. The exit status is nonzero when there are no more options.
hash [ -dfmr ] [ name[=value] ] ...
With no arguments or options, hash will list the entire command
hash table.
The -m option causes the arguments to be taken as patterns
(they should be quoted) and the elements of the command hash table
matching these patterns are printed.
The -r option causes the command hash table to be thrown out and
restarted. The -f option causes the entire path to be searched,
and all the commands found are added to the hash table. These options
cannot be used with any arguments.
For each name with a corresponding value, put name in
the command hash table, associating it with the pathname value.
Whenever name is used as a command argument, the shell will try
to execute the file given by value. For each name with no
corresponding value, search for name in the path, and add
it to the command hash table, and associating it with the discovered
path, if it is found.
Adding the -d option causes hash to act on the named
directory table instead of the command hash table. The remaing discussion
of hash will assume that the -d is given.
If invoked without any arguments, and without any other options,
hash -d lists the entire named directory table.
The -m option causes the arguments to be taken as patterns
(they should be quoted) and the elements of the named directory table
matching these patterns are printed.
The -r option causes the named directory table to be thrown out
and restarted so that it only contains `~'. The -f option causes
all usernames to be added to the named directory table. There options
cannot be used with any arguments.
For each name with a
corresponding value, put name in the named directory table.
The directory name name is then associated with the specified path
value, so that value may be referred to as `~name'.
For each name with no corresponding value, search for as a
username and as a parameter. If it is found, it is added to the named
directory hash table.
history [ -nrdDfEim ] [ first [ last ] ]
integer [ \(+-lrtux ] [ name[=value] ] ...
Same as typeset -i, except that options irrelevant to
integers are not permitted.
jobs [ -lprs ] [ job ... ]
Lists information about each given job, or all jobs
if job is omitted. The -l flag lists process
ids, and the -p flag lists process groups.
If the -r flag is specified only running jobs will be listed
and if the -s flag is given only stopped jobs are shown.
kill [ -s signal_name ] job ...
kill [ -sig ] job ...
kill -l [ sig ... ]
Sends either SIGTERM or the specified signal to the given
jobs or processes.
Signals are given by number or by names, without the SIG prefix.
If the signal being sent is not KILL or CONT, then the job
will be sent a CONT signal if it is stopped.
The argument job can be the process id of a job
not in the job list.
In the third form, kill -l, if sig is not
specified the signal names are listed. Otherwise, for each
sig that is a name, the corresponding signal number is
listed. For each sig that is a signal number or a number
representing the exit status of a process which was terminated or
stopped by a signal the name of the signal is printed.
let arg ...
Evaluate each arg as an arithmetic expression.
See ARITHMETIC EVALUATION above for a description
of arithmetic expressions. The exit status is 0 if the
value of the last expression is nonzero, and 1 otherwise.
limit [ -hs ] [ resource [ limit ] ] ...
Set or display resource limits. Unless the -s flag is given
the limit applies only the children of the shell. If -s is
given without other arguments, the resource limits of the current
shell is set to the previously set resource limits of the children.
If limit is not specified, print the current limit placed
on resource; otherwise
set the limit to the specified value. If the -h flag
is given, use hard limits instead of soft limits.
If no resource is given, print all limits.
resource is one of:
cputime
Maximum CPU seconds per process.
filesize
Largest single file allowed.
datasize
Maximum data size (including stack) for each process.
stacksize
Maximum stack size for each process.
coredumpsize
Maximum size of a core dump.
resident
Maximum resident set size.
memoryuse
memorylocked
Maximum amount of memory locked in RAM.
descriptors
Maximum value for a file descriptor.
openfiles
Maximum number of open files.
vmemorysize
Maximum amount of virtual memory.
Which of these resource limits are available depends on the system.
limit is a number, with an optional scaling factor, as follows:
nh
nk
kilobytes.
This is the default for all but cputime.
nm
mm:ss
local [ \(+-LRZilrtu [n]] [ name[=value] ] ...
Same as typeset, except that the options -x and
-f are not permitted.
log
List all users currently logged in who are affected by
the current setting of the watch parameter.
logout
Exit the shell, if this is a login shell.
noglob simple command
See the secion PRECOMMAND MODIFIERS in zshmisc(1).
popd [ \(+-n ]
Removes a entry from the directory stack, and perform a cd to
the new top directory. With no argument, the current top entry is
removed. An argument of the form +n identifies a stack entry by
counting from the left of the list shown by the dirs command,
starting with zero. An argument of the form -n counts from the
right. If the PUSHD_MINUS option is set, the meanings of + and
- in this context are swapped.
print [ -nrslzpNDPoOicm ] [ -un ] \
[ -R [ -en ]] [ arg ... ]
With no flags or with flag -, the arguments are printed on
the standard output as described by echo, with the following differences:
the escape sequence \eM-x metafies the character x (sets the highest
bit), \eC-x produces a control character (\eC-@ and \eC-? give the
characters NULL and delete) and \eE is a synonym for \ee.
Finally, if not in an escape
sequence, \e escapes the following character and is not printed.
-r
ignore the escape conventions of echo.
-R
emulate the BSD echo command which does not process escape sequences
unless the -e flag is given. The -n flag suppresses the trailing
newline. Only the -e and -n flags are recognized after
-R, all other arguments and options are printed.
-m
Take the fist argument as a pattern (should be quoted) and remove
it from the argument list together with subsequent arguments that
do not match this pattern.
-s
place the results in the history list instead of on the standard output.
-n
do not add a newline to the output.
-l
print the arguments separated by newlines instead of spaces.
-N
print the arguments separated and terminated by nulls.
-o
print the arguments sorted in ascending order.
-O
print the arguments sorted in descending order.
-i
if given together with -o or -O makes them work case
independently
-c
print the arguments in columns
-un
print the arguments to file descriptor n.
-p
print the arguments to the input of the coprocess.
-z
push the arguments onto the editing buffer stack, separated by spaces;
no escape sequences are recognized.
-D
treat the arguments as directory names, replacing prefixes with ~
expressions, as appropriate.
-P
recognize the same escape sequences as in the PROMPT parameter.
pushd [ arg ]
pushd old new
pushd \(+-n
Change the current directory, and push the old current directory
onto the directory stack. In the first form, change the
current directory to arg.
If arg is not specified, change to the second directory
on the stack (that is, exchange the top two entries), or
change to the value of HOME if the PUSHD_TO_HOME
option is set or if there is only one entry on the stack.
If arg is -, change to the
value of OLDPWD, the previous directory.
If a directory named arg is not found in the current directory
and arg does not contain a slash,
search each component of the shell parameter cdpath.
If the option CDABLEVARS is set, and a parameter named arg
exists whose value begins with a slash, treat its value as
the directory.
If the option PUSHD_SILENT is not set, the directory
stack will be printed after a pushd is performed.
The second form of pushd substitutes the string new
for the string old in the name of the current directory,
and tries to change to this new directory.
The third form of pushd changes directory by rotating the
directory list. An argument of the form +n identifies a stack
entry by counting from the left of the list shown by the dirs
command, starting with zero. An argument of the form -n counts
from the right. If the PUSHD_MINUS option is set, the meanings
of + and - in this context are swapped.
pushln
pwd [ -r ]
Print the absolute pathname of the current working directory.
If the -r flag is specified or the CHASE_LINKS option
is set, the printed path will not contain symbolic links.
r
read [ -rzpqAclneE ] [ -k [ num ] ]
[ -un ] [ name?prompt ] [ name ... ]
Read one line and break it into fields using the characters
in IFS as separators.
-r
Raw mode: a \e at the end of a line does not signify line
continuation.
-q
Read only one character from the terminal and set name to
`y' if this character was `y' or `Y' and to `n' otherwise.
With this flag set the return value is zero only if the character was
`y' or `Y'.
-k [ num ]
Read only one (or num) characters from the terminal.
-z
Read from the editor buffer stack.
The first field is assigned to the first name, the second field
to the second name, etc., with leftover
fields assigned to the last name.
-e
-E
The words read are printed after the whole line is read. If the
-e flag is set, the words are not assigned to the parameters.
-A
The first name is taken as the
name of an array and all words are assigned to it.
-c
-l
These flags are allowed only if called inside a
function used for completion (specified with the -K flag to
compctl). If the -c flag is given, the words of the
current command are read. If the -l flag is given, the whole
line is assigned as a scalar. If name is omitted then
REPLY is used for scalars and reply for arrays.
-n
Together with either of the previous flags, this
option gives the number of the word the cursor is on or the index of
the character the cursor is on respectively.
-un
Input is read from file descriptor n.
-p
Input is read from the coprocess.
If the first argument contains a ?, the remainder of this
word is used as a prompt on standard error when the shell
is interactive. The exit status is 0 unless an end-of-file
is encountered.
readonly [ name[=value] ] ...
The given names are marked readonly; these names
cannot be changed by subsequent assignment.
rehash [ -df ]
Throw out the command hash table and start over.
If the -f option is set, rescan the command path
immediately, instead of rebuilding the hash table incrementally.
The -d option causes rehash to act on the named
directory table instead of the command hash table. This reduces
the named directory table to only the `~' entry. If the -f
option is also used, the named directory table is rebuilt
immediately.
rehash is equivalent to hash -r.
return [ n ]
Causes a shell function or . script to return to
the invoking script
with the return status specified by n. If n
is omitted then the return status is that of the last command
executed.
If return was executed from a trap in a TRAPxxx function,
the effect is different for zero and non-zero return status. With zero
status (or after an implicit return at the end of the trap), the shell
will return to whatever it was previously processing; with a non-zero
status, the shell will behave as interrupted except that the return
status of the trap is retained. Note that the signal which caused the
trap is passed as the first argument, so the statement `return
$((128+$1))' will return the same status as if the signal had not
been trapped.
sched [+]hh:mm command ...
sched [ -item ]
Make an entry in the scheduled list of commands to execute.
The time may be specified in either absolute or relative time.
With no arguments, prints the list of scheduled commands.
With the argument -item, removes the given item
from the list.
set [ \(+-options ] [ \(+-o option name ] ... [ \(+-A [ name ] ] [ arg ... ]
Set the options for the shell and/or set the positional parameters, or
declare and set an array. If the -s option is given it causes the
specified arguments to be sorted before assigning them to the positional
parameters (or to the array name if -A is used). With \+s
sort arguments in descending order. For the meaning of the other flags,
see the zshoptions man page. Flags may be specified by name using
the -o option. If the -A flag is specified, name is
set to an array containing the given args; if \+A is used and
name is an array, the gien arguments will replace the initial
elements of that array; if no name is specified, all arrays are
printed. Otherwise the positional parameters are set. If no arguments are
given, then the names and values of all parameters are printed on the
standard output. If the only argument is +, the names of all parameters
are printed.
setopt [ \(+-options ] [ name ... ]
Set the options for the shell. All options specified either
with flags or by name are set. If no arguments are supplied,
the names of all options currently set are printed.
In option names, case is insignificant, and all underscore
characters are ignored.
If the -m flag is given the arguments are taken as patterns
(should be quoted to preserve them from being interpreted as glob
patterns) and all options with names matching these patterns are set.
shift [ n ] [ name ... ]
The positional parameters from $n+1 ... are renamed
$1, where n is an arithmetic expression that
defaults to 1.
If any names are given then the arrays with these names are
shifted instead of the positional parameters.
source
Same as ., except that the current directory is always searched and
is always searched first, before directories in path.
suspend [ -f ]
Suspend the execution of the shell (send it a SIGTSTP)
until it receives a SIGCONT.
If the -f option is not given, complain if this is a login shell.
test arg ...
[ arg ... ]
Like the system version of test. Added for compatibility;
use conditional expressions instead.
times
Print the accumulated user and system times for the shell
and for processes run from the shell.
trap [ arg ] [ sig ] ...
arg is a command to be read and executed when the shell
receives sig. Each sig can be given as a number
or as the name of a signal.
If arg is -, then all traps sig are reset to their
default values. If arg is the null string, then this signal
is ignored by the shell and by the commands it invokes.
If sig is ZERR then arg will be executed
after each command with a nonzero exit status.
If sig is DEBUG then arg will be executed
after each command.
If sig is 0 or EXIT
and the trap statement is executed inside the body of a function,
then the command arg is executed after the function completes.
If sig is 0 or EXIT
and the trap statement is not executed inside the body of a function,
then the command arg is executed when the shell terminates.
The trap command with no arguments prints a list of commands
associated with each signal.
true
Do nothing and return an exit code of 0.
ttyctl -fu
The -f option freezes the tty, and -u unfreezes it.
When the tty is frozen, no changes made to the tty settings by
external programs will be honored by the shell, except for changes in the
size of the screen; the shell will
simply reset the settings to their previous values as soon as each
command exits or is suspended. Thus, stty and similar programs have
no effect when the tty is frozen. Without options it reports whether the
terminal is frozen or not.
type [ -fpam ] name ...
typeset [ \(+-LRUZfilrtuxm [n]] [ name[=value] ] ...
Set attributes and values for shell parameters.
When invoked inside a function a new parameter is created which will be
unset when the function completes. The new parameter will not be
exported unless ALLEXPORT is set, in which case the parameter will be
exported provided no parameter of that name already exists.
The following attributes are valid:
-L
Left justify and remove leading blanks from value.
If n is nonzero, it defines the width of the field;
otherwise it is determined by the width of the value of the first
assignment.
When the parameter is printed, it is filled on the right with
blanks or truncated if necessary to fit the field.
Leading zeros are removed if the -Z flag is also set.
-R
Right justify and fill with leading blanks. If n is nonzero
if defines the width of the field;
otherwise it is determined by the width of the value of the first
assignment.
When the parameter is printed, the field is left filled with
blanks or truncated from the end.
-U
For arrays keep only the first element of each duplications. It can also be
set for colon separated special parameters like PATH or FIGNORE,
etc.
-Z
Right justify and fill with leading zeros if the first non-blank
character is a digit and the -L flag has not been set.
If n is nonzero it defines the width of the field;
otherwise it is determined by the width of the value of the
first assignment.
-f
The names refer to functions rather than parameters. No assignments
can be made, and the only other valid flags are -t
and -u. The flag -t turns on execution tracing for this
function. The flag -u causes this function to be marked
for autoloading. The fpath parameter will be searched to find the
function definition when the function is first referenced; see
autoload.
-i
Use an internal integer representation. If n is nonzero
it defines the output arithmetic base, otherwise it is determined by the first
assignment.
-l
-r
The given names are marked readonly.
-t
Tags the named parameters. Tags have no special meaning to the shell.
-u
-x
Mark for automatic export to the environment of subsequently
executed commands.
Using + rather than - causes these flags to be turned off.
If no arguments are given but flags are specified,
a list of named parameters which have these flags set is printed.
Using + instead of - keeps their values from being printed.
If no arguments or options are given, the names and attributes
of all parameters are printed. If only the -m flag is given the
arguments are taken as patterns (should be quoted) and all parameters
or functions (with the -f flag) with matching names are printed.
ulimit [ -SHacdflmnpstv ] [ limit ] ...
Set or display resource limits of the shell and the processes started by
the shell. The value of limit can be a number in the unit specified
below or the value unlimited. If the -H flag is given use
hard limits instead of soft limits. If the -S flag is given
together with the -H flag set both hard and soft limits. If no
options are used, the file size limit (-f) is assumed. If
limit is omitted the current value of the specified resources are
printed. When more than one resource values are printed the limit name and
unit is printed before each value.
-a
Lists all of the current resource limits.
-c
The number of 512-byte blocks on the size of core dumps.
-d
The number of K-bytes on the size of the data segment.
-f
The number of 512-byte blocks on the size of files written.
-l
The number of K-bytes on the size of locked-in memory.
-m
The number of K-bytes on the size of physical memory.
-n
The number of open file descriptors.
-s
The number of K-bytes on the size of the stack.
-t
The number of CPU seconds to be used.
-u
The number of processes available to the user.
-v
The number of K-bytes on the size of virtual memory.
umask [ -S ] [ mask ]
The umask is set to mask. mask can be either
an octal number or a symbolic value as described in chmod(1).
If mask is omitted, the current value is printed. The -S
option causes the mask to be printed as a symbolic value. Otherwise,
the mask is printed as an octal number. Note that in
the symbolic form the permissions you specify are those which are to be
allowed (not denied) to the users specified.
unalias [ -m ] name ...
The alias definition, if any, for each name is removed.
With the -m flag the arguments are taken as patterns (should be
quoted) and all aliases with names matching the patterns are removed.
unalias is equivalent to unhash -a.
unfunction [ -m ] name ...
The function definition, if any, for each name is removed. If the
-m flag is specified the arguments are taken as patterns (should
be quoted) and all functions with names matching the patterns are removed.
unfunction is equivalent to unhash -f.
unhash [ -adfm ] name ...
Remove the element named name from an internal hash table. The
default is remove elements from the command hash table. The -a
option causes unhash to remove aliases. The -f option causes
unhash to remove shell functions. The -d options causes
unhash to remove named directories. If the -m flag is given
the arguments are taken as patterns (should be quoted) and all elements
of the corresponding hash table with matching names will be removed.
unlimit [ -hs ] resource ...
The resource limit for each resource is set to the hard limit.
If the -h flag is given and the shell is running as root,
the hard resource limit for each resource is removed.
The resources of the shell process are only changed if the -s
flag is given.
unset [ -fm ] name ...
Each named parameter is unset. If the -m flag is specified the
arguments are taken as patterns (should be quoted) and all parameters
with matching names are unset. Unset -f is equivalent to
unfunction.
unsetopt [ \(+-options ] [ name ... ]
Unset the options for the shell. All options specified either
with flags or by name are unset. If the -m flag is given the
arguments are considered to be patterns (don't forget to quote them)
and all options with names matching these patterns are unset.
vared [ -c ] [ -h ] [ -p prompt ] [ -r rprompt ] name
The value of the parameter name is loaded into the edit
buffer, and the line editor is invoked. When the editor exits,
name is set to the string value returned by the editor.
If the -c flag is given the parameter is created if it doesn't
already exist.
If the -p flag is given the following string will be taken as
the prompt to display at the left and if the -r flag is given
the following string gives the prompt to display at the right. If the
-h flag is specified, the history can be accessed from zle.
wait [ job ... ]
Wait for the specified jobs or processes. If job is not given
then all currently active child processes are waited for.
Each job can be either a job specification or the process-id
of a job in the job table.
The exit status from this command is that of the job waited for.
whence [ -vcfpam ] name ...
For each name, indicate how it would be interpreted if used as a
command name. The -v flag produces a more verbose report.
The -c flag prints the results in a csh-like format,
and takes precedence over -v.
The -f flag causes the contents of a shell function to be
displayed, which would otherwise not happen unless the -c
flag were used.
The -p flag does a path search for name
even if it is an alias, reserved word, shell function or builtin.
The -a flag does a search for all occurrences of name
throughout the command path.
With the -m flag the arguments are taken as patterns (should be
quoted) and the information is displayed for each command matching one
of these patterns.
where
which [ -pam ] name ...
|
|