RECNO (3)
record number database access method
SYNOPSIS
B
#include <sys/types.h>
#include <db.h>
R
DESCRIPTION
The routine
dbopen
is the library interface to database files.
One of the supported file formats is record number files.
The general description of the database access methods is in
dbopen (3),
this manual page describes only the recno specific information.
The record number data structure is either variable or fixed-length
records stored in a flat-file format, accessed by the logical record
number.
The existence of record number five implies the existence of records
one through four, and the deletion of record number one causes
record number five to be renumbered to record number four, as well
as the cursor, if positioned after record number one, to shift down
one record.
The recno access method specific data structure provided to
dbopen
is defined in the <db.h> include file as follows:
typedef struct {
u_long flags;
u_int cachesize;
u_int psize;
int lorder;
size_t reclen;
u_char bval;
char *bfname;
} RECNOINFO;
The elements of this structure are defined as follows:
flags
The flag value is specified by
or 'ing
any of the following values:
R_FIXEDLEN
The records are fixed-length, not byte delimited.
The structure element
reclen
specifies the length of the record, and the structure element
bval
is used as the pad character.
Any records, inserted into the database, that are less than
reclen
bytes long are automatically padded.
R_NOKEY
In the interface specified by
dbopen ,
the sequential record retrieval fills in both the caller's key and
data structures.
If the R_NOKEY flag is specified, the
cursor
routines are not required to fill in the key structure.
This permits applications to retrieve records at the end of files without
reading all of the intervening records.
R_SNAPSHOT
This flag requires that a snapshot of the file be taken when
dbopen
is called, instead of permitting any unmodified records to be read from
the original file.
cachesize
A suggested maximum size, in bytes, of the memory cache.
This value is
only
advisory, and the access method will allocate more memory rather than fail.
If
cachesize
is 0 (no size is specified) a default cache is used.
psize
The recno access method stores the in-memory copies of its records
in a btree.
This value is the size (in bytes) of the pages used for nodes in that tree.
If
psize
is 0 (no page size is specified) a page size is chosen based on the
underlying file system I/O block size.
See
btree (3)
for more information.
lorder
The byte order for integers in the stored database metadata.
The number should represent the order as an integer; for example,
big endian order would be the number 4,321.
If
lorder
is 0 (no order is specified) the current host order is used.
reclen
The length of a fixed-length record.
bval
The delimiting byte to be used to mark the end of a record for
variable-length records, and the pad character for fixed-length
records.
If no value is specified, newlines (``\en'') are used to mark the end
of variable-length records and fixed-length records are padded with
spaces.
bfname
The recno access method stores the in-memory copies of its records
in a btree.
If bfname is non-NULL, it specifies the name of the btree file,
as if specified as the file name for a dbopen of a btree file.
The data part of the key/data pair used by the recno access method
is the same as other access methods.
The key is different.
The
data
field of the key should be a pointer to a memory location of type
recno_t ,
as defined in the <db.h> include file.
This type is normally the largest unsigned integral type available to
the implementation.
The
size
field of the key should be the size of that type.
Because there can be no meta-data associated with the underlying
recno access method files, any changes made to the default values
(e.g. fixed record length or byte separator value) must be explicitly
specified each time the file is opened.
In the interface specified by
dbopen ,
using the
put
interface to create a new record will cause the creation of multiple,
empty records if the record number is more than one greater than the
largest record currently in the database.
ERRORS
The
recno
access method routines may fail and set
errno
for any of the errors specified for the library routine
dbopen (3)
or the following:
[EINVAL]
An attempt was made to add a record to a fixed-length database that
was too large to fit.
SEE ALSO
- btree (3) -
- dbopen (3) -
hash(3) - mpool (3) -
Document Processing in a Relational Database System Michael Stonebraker Heidi Stettner Joseph Kalash Antonin Guttman Nadene Lynn Memorandum No UCB/ERL M82/32 May 1982
BUGS
Only big and little endian byte order is supported.
'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" RCS: @(#) $Id: RecordEval.3,v 1.2 1998/09/14 18:39:50 stanton Exp $
'\"
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .AP type name in/out ?indent?
'\" Start paragraph describing an argument to a library procedure.
'\" type is type of argument (int, etc.), in/out is either "in", "out",
'\" or "in/out" to describe whether procedure reads or modifies arg,
'\" and indent is equivalent to second arg of .IP (shouldn't ever be
'\" needed; use .AS below instead)
'\"
'\" .AS ?type? ?name?
'\" Give maximum sizes of arguments for setting tab stops. Type and
'\" name are examples of largest possible arguments that will be passed
'\" to .AP later. If args are omitted, default tab stops are used.
'\"
'\" .BS
'\" Start box enclosure. From here until next .BE, everything will be
'\" enclosed in one large box.
'\"
'\" .BE
'\" End of box enclosure.
'\"
'\" .CS
'\" Begin code excerpt.
'\"
'\" .CE
'\" End code excerpt.
'\"
'\" .VS ?version? ?br?
'\" Begin vertical sidebar, for use in marking newly-changed parts
'\" of man pages. The first argument is ignored and used for recording
'\" the version when the .VS was added, so that the sidebars can be
'\" found and removed when they reach a certain age. If another argument
'\" is present, then a line break is forced before starting the sidebar.
'\"
'\" .VE
'\" End of vertical sidebar.
'\"
'\" .DS
'\" Begin an indented unfilled display.
'\"
'\" .DE
'\" End of indented unfilled display.
'\"
'\" .SO
'\" Start of list of standard options for a Tk widget. The
'\" options follow on successive lines, in four columns separated
'\" by tabs.
'\"
'\" .SE
'\" End of list of standard options for a Tk widget.
'\"
'\" .OP cmdName dbName dbClass
'\" Start of description of a specific option. cmdName gives the
'\" option's name as specified in the class command, dbName gives
'\" the option's name in the option database, and dbClass gives
'\" the option's class in the option database.
'\"
'\" .UL arg1 arg2
'\" Print arg1 underlined, then print arg2 normally.
'\"
'\" RCS: @(#) $Id: man.macros,v 1.2 1998/09/14 18:39:54 stanton Exp $
'\"
'\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
t .wh -1.3i ^B
^l \n(.l
b
'\" # Start an argument description
AP
!"\\$4"" .TP \\$4
\{\
!"\\$2"" .TP \\n()Cu
.TP 15
|