menubutton (n)

SYNOPSIS

menubutton pathName ?options? -activebackground -cursor -highlightthickness -takefocus -activeforeground -disabledforeground -image -text -anchor -font -justify -textvariable -background -foreground -padx -underline -bitmap -highlightbackground -pady -wraplength -borderwidth -highlightcolor -relief

WIDGET-SPECIFIC OPTIONS

-direction direction Height Specifies where the menu is going to be popup up. above tries to pop the menu above the menubutton. below tries to pop the menu below the menubutton. left tries to pop the menu to the left of the menubutton. right tries to pop the menu to the right of the menu button. flush pops the menu directly over the menubutton. -height height Height Specifies a desired height for the menubutton. If an image or bitmap is being displayed in the menubutton then the value is in screen units (i.e. any of the forms acceptable to Tk_GetPixels); for text it is in lines of text. If this option isn't specified, the menubutton's desired height is computed from the size of the image or bitmap or text being displayed in it. -indicatoron indicatorOn IndicatorOn The value must be a proper boolean value. If it is true then a small indicator rectangle will be displayed on the right side of the menubutton and the default menu bindings will treat this as an option menubutton. If false then no indicator will be displayed. -menu menu MenuName Specifies the path name of the menu associated with this menubutton. The menu must be a child of the menubutton. -state state State Specifies one of three states for the menubutton: normal, active, or disabled. In normal state the menubutton is displayed using the foreground and background options. The active state is typically used when the pointer is over the menubutton. In active state the menubutton is displayed using the activeForeground and activeBackground options. Disabled state means that the menubutton should be insensitive: the default bindings will refuse to activate the widget and will ignore mouse button presses. In this state the disabledForeground and background options determine how the button is displayed. -width width Width Specifies a desired width for the menubutton. If an image or bitmap is being displayed in the menubutton then the value is in screen units (i.e. any of the forms acceptable to Tk_GetPixels); for text it is in characters. If this option isn't specified, the menubutton's desired width is computed from the size of the image or bitmap or text being displayed in it.

INTRODUCTION

The menubutton command creates a new window (given by the pathName argument) and makes it into a menubutton widget. Additional options, described above, may be specified on the command line or in the option database to configure aspects of the menubutton such as its colors, font, text, and initial relief. The menubutton command returns its pathName argument. At the time this command is invoked, there must not exist a window named pathName, but pathName's parent must exist.

A menubutton is a widget that displays a textual string, bitmap, or image and is associated with a menu widget. If text is displayed, it must all be in a single font, but it can occupy multiple lines on the screen (if it contains newlines or if wrapping occurs because of the wrapLength option) and one of the characters may optionally be underlined using the underline option. In normal usage, pressing mouse button 1 over the menubutton causes the associated menu to be posted just underneath the menubutton. If the mouse is moved over the menu before releasing the mouse button, the button release causes the underlying menu entry to be invoked. When the button is released, the menu is unposted.

Menubuttons are typically organized into groups called menu bars that allow scanning: if the mouse button is pressed over one menubutton (causing it to post its menu) and the mouse is moved over another menubutton in the same menu bar without releasing the mouse button, then the menu of the first menubutton is unposted and the menu of the new menubutton is posted instead.

There are several interactions between menubuttons and menus; see the menu manual entry for information on various menu configurations, such as pulldown menus and option menus.

WIDGET COMMAND

The menubutton command creates a new Tcl command whose name is pathName. This command may be used to invoke various operations on the widget. It has the following general form: pathName option ?arg arg ...? Option and the args determine the exact behavior of the command. The following commands are possible for menubutton widgets:

pathName cget option

Returns the current value of the configuration option given by option. Option may have any of the values accepted by the menubutton command.

pathName configure ?option? ?value option value ...?

Query or modify the configuration options of the widget. If no option is specified, returns a list describing all of the available options for pathName (see Tk_ConfigureInfo for information on the format of this list). If option is specified with no value, then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no option is specified). If one or more option-value pairs are specified, then the command modifies the given widget option(s) to have the given value(s); in this case the command returns an empty string. Option may have any of the values accepted by the menubutton command.

DEFAULT BINDINGS

Tk automatically creates class bindings for menubuttons that give them the following default behavior:

A menubutton activates whenever the mouse passes over it and deactivates whenever the mouse leaves it.

Pressing mouse button 1 over a menubutton posts the menubutton: its relief changes to raised and its associated menu is posted under the menubutton. If the mouse is dragged down into the menu with the button still down, and if the mouse button is then released over an entry in the menu, the menubutton is unposted and the menu entry is invoked.

If button 1 is pressed over a menubutton and then released over that menubutton, the menubutton stays posted: you can still move the mouse over the menu and click button 1 on an entry to invoke it. Once a menu entry has been invoked, the menubutton unposts itself.

If button 1 is pressed over a menubutton and then dragged over some other menubutton, the original menubutton unposts itself and the new menubutton posts.

If button 1 is pressed over a menubutton and released outside any menubutton or menu, the menubutton unposts without invoking any menu entry.

When a menubutton is posted, its associated menu claims the input focus to allow keyboard traversal of the menu and its submenus. See the menu manual entry for details on these bindings.

If the underline option has been specified for a menubutton then keyboard traversal may be used to post the menubutton: Alt+x, where x is the underlined character (or its lower-case or upper-case equivalent), may be typed in any window under the menubutton's toplevel to post the menubutton.

The F10 key may be typed in any window to post the first menubutton under its toplevel window that isn't disabled.

If a menubutton has the input focus, the space and return keys post the menubutton.

If the menubutton's state is disabled then none of the above actions occur: the menubutton is completely non-responsive.

The behavior of menubuttons can be changed by defining new bindings for individual widgets or by redefining the class bindings.

KEYWORDS

menubutton, widget '\" '\" Copyright (c) 1990-1994 The Regents of the University of California. '\" Copyright (c) 1994-1996 Sun Microsystems, Inc. '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" '\" RCS: @(#) $Id: message.n,v 1.2 1998/09/14 18:22:58 stanton Exp $ '\" '\" The definitions below are for supplemental macros used in Tcl/Tk '\" manual entries. '\" '\" .AP type name in/out ?indent? '\" Start paragraph describing an argument to a library procedure. '\" type is type of argument (int, etc.), in/out is either "in", "out", '\" or "in/out" to describe whether procedure reads or modifies arg, '\" and indent is equivalent to second arg of .IP (shouldn't ever be '\" needed; use .AS below instead) '\" '\" .AS ?type? ?name? '\" Give maximum sizes of arguments for setting tab stops. Type and '\" name are examples of largest possible arguments that will be passed '\" to .AP later. If args are omitted, default tab stops are used. '\" '\" .BS '\" Start box enclosure. From here until next .BE, everything will be '\" enclosed in one large box. '\" '\" .BE '\" End of box enclosure. '\" '\" .CS '\" Begin code excerpt. '\" '\" .CE '\" End code excerpt. '\" '\" .VS ?version? ?br? '\" Begin vertical sidebar, for use in marking newly-changed parts '\" of man pages. The first argument is ignored and used for recording '\" the version when the .VS was added, so that the sidebars can be '\" found and removed when they reach a certain age. If another argument '\" is present, then a line break is forced before starting the sidebar. '\" '\" .VE '\" End of vertical sidebar. '\" '\" .DS '\" Begin an indented unfilled display. '\" '\" .DE '\" End of indented unfilled display. '\" '\" .SO '\" Start of list of standard options for a Tk widget. The '\" options follow on successive lines, in four columns separated '\" by tabs. '\" '\" .SE '\" End of list of standard options for a Tk widget. '\" '\" .OP cmdName dbName dbClass '\" Start of description of a specific option. cmdName gives the '\" option's name as specified in the class command, dbName gives '\" the option's name in the option database, and dbClass gives '\" the option's class in the option database. '\" '\" .UL arg1 arg2 '\" Print arg1 underlined, then print arg2 normally. '\" '\" RCS: @(#) $Id: man.macros,v 1.2 1998/09/14 18:39:54 stanton Exp $ '\" '\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages. t .wh -1.3i ^B ^l \n(.l b '\" # Start an argument description AP !"\\$4"" .TP \\$4 \{\ !"\\$2"" .TP \\n()Cu .TP 15