ld (1)
the GNU linker
SYNOPSIS
0
ld
[\| -o
output\c
\|] \c
objfile\c
.\|.\|.
[\| -A\c
architecture\c
\|]
[\| -b\ \c
input-format\c
\|]
[\| -Bstatic \|]
[\| -Bdynamic \|]
[\| -Bsymbolic \|]
[\| -c\ \c
commandfile\c
\|]
[\| --cref \|]
[\| -d | -dc | -dp\c
\|]
[\| -defsym\ \c
symbol\c
= \c
expression\c
\|]
[\| --demangle \|]
[\| --no-demangle \|]
[\| -e\ \c
entry\c
\|]
[\| -embedded-relocs \|]
[\| -E \|]
[\| -export-dynamic \|]
[\| -f\ \c
name\c
\|]
[\| --auxiliary\ \c
name\c
\|]
[\| -F\ \c
name\c
\|]
[\| --filter\ \c
name\c
\|]
[\| -format\ \c
input-format\c
\|]
[\| -g \|]
[\| -G
size\c
\|]
[\| -h\ \c
name\c
\|]
[\| -soname\ \c
name\c
\|]
[\| --help \|]
[\| -i \|]
[\| -l\c
ar\c
\|]
[\| -L\c
searchdir\c
\|]
[\| -M \|]
[\| -Map
mapfile\c
\|]
[\| -m
emulation\c
\|]
[\| -n | -N \|]
[\| -noinhibit-exec \|]
[\| -no-keep-memory \|]
[\| -no-warn-mismatch \|]
[\| -O\c
level\c
\|]
[\| -oformat\ \c
output-format\c
\|]
[\| -R\ \c
filename\c
\|]
[\| -relax \|]
[\| -r | -Ur \|]
[\| -rpath\ \c
directory\c
\|]
[\| -rpath-link\ \c
directory\c
\|]
[\| -S \|]
[\| -s \|]
[\| -shared \|]
[\| -sort-common \|]
[\| -split-by-reloc\ \c
count\c
\|]
[\| -split-by-file \|]
[\| -T\ \c
commandfile\c
\|]
[\| -Ttext\ \c
textorg\c
\|]
[\| -Tdata\ \c
dataorg\c
\|]
[\| -Tbss\ \c
bssorg\c
\|]
[\| -t \|]
[\| -u\ \c
sym\c
]
[\| -V \|]
[\| -v \|]
[\| --verbose \|]
[\| --version \|]
[\| -warn-common \|]
[\| -warn-constructors \|]
[\| -warn-multiple-gp \|]
[\| -warn-once \|]
[\| -warn-section-align \|]
[\| --whole-archive \|]
[\| --no-whole-archive \|]
[\| --wrap\ \c
symbol\c
\|]
[\| -X \|]
[\| -x \|]
b
1
DESCRIPTION
\c
ld\c
combines a number of object and archive files, relocates
their data and ties up symbol references. Often the last step in
building a new compiled program to run is a call to \c
ld\c
.
\c
ld\c
accepts Linker Command Language files
to provide explicit and total control over the linking process.
This man page does not describe the command language; see the `\|\c
ld\c
\|' entry in `\|\c
info\c
\|', or the manual
ld: the GNU linker
, for full details on the command language and on other aspects of
the GNU linker.
This version of \c
ld\c
uses the general purpose BFD libraries
to operate on object files. This allows \c
ld\c
to read, combine, and
write object files in many different formats for example, COFF or
\c
a.out\c
. Different formats may be linked together to produce any
available kind of object file. You can use `\|\c
objdump -i\c
\|' to get a list of formats supported on various architectures; see
objdump ( 1 ).
Aside from its flexibility, the GNU linker is more helpful than other
linkers in providing diagnostic information. Many linkers abandon
execution immediately upon encountering an error; whenever possible,
\c
ld\c
continues executing, allowing you to identify other errors
(or, in some cases, to get an output file in spite of the error).
The GNU linker \c
ld\c
is meant to cover a broad range of situations,
and to be as compatible as possible with other linkers. As a result,
you have many choices to control its behavior through the command line,
and through environment variables.
OPTIONS
The plethora of command-line options may seem intimidating, but in
actual practice few of them are used in any particular context.
For instance, a frequent use of \c
ld\c
is to link standard Unix
object files on a standard, supported Unix system. On such a system, to
link a file \c
hello.o\c
:
$\ ld\ -o\ output\ /lib/crt0.o\ hello.o\ -lc
This tells \c
ld\c
to produce a file called \c
output\c
as the
result of linking the file \c
/lib/crt0.o\c
with \c
hello.o\c
and
the library \c
libc.a\c
which will come from the standard search
directories.
The command-line options to \c
ld\c
may be specified in any order, and
may be repeated at will. For the most part, repeating an option with a
different argument will either have no further effect, or override prior
occurrences (those further to the left on the command line) of an
option.
The exceptions which may meaningfully be used more than once are
\c
-A\c
, \c
-b\c
(or its synonym \c
-format\c
), \c
-defsym\c
,
\c
-L\c
, \c
-l\c
, \c
-R\c
, and \c
-u\c
.
The list of object files to be linked together, shown as \c
objfile\c
,
may follow, precede, or be mixed in with command-line options; save that
an \c
objfile\c
argument may not be placed between an option flag and
its argument.
Usually the linker is invoked with at least one object file, but other
forms of binary input files can also be specified with \c
-l\c
,
\c
-R\c
, and the script command language. If \c
no\c
binary input
files at all are specified, the linker does not produce any output, and
issues the message `\|\c
No input files\c
\|'.
Option arguments must either follow the option letter without intervening
whitespace, or be given as separate arguments immediately following the
option that requires them.
-A architecture
In the current release of \c
ld\c
, this option is useful only for the
Intel 960 family of architectures. In that \c
ld\c
configuration, the
\c
architecture\c
argument is one of the two-letter names identifying
members of the 960 family; the option specifies the desired output
target, and warns of any incompatible instructions in the input files.
It also modifies the linker's search strategy for archive libraries, to
support the use of libraries specific to each particular
architecture, by including in the search loop names suffixed with the
string identifying the architecture.
For example, if your \c
ld\c
command line included `\|\c
-ACA\c
\|' as
well as `\|\c
-ltry\c
\|', the linker would look (in its built-in search
paths, and in any paths you specify with \c
-L\c
) for a library with
the names
try
libtry.a
tryca
libtryca.a
The first two possibilities would be considered in any event; the last
two are due to the use of `\|\c
-ACA\c
\|'.
Future releases of \c
ld\c
may support similar functionality for
other architecture families.
You can meaningfully use \c
-A\c
more than once on a command line, if
an architecture family allows combination of target architectures; each
use will add another pair of name variants to search for when \c
-l
specifies a library.
-b input-format
Specify the binary format for input object files that follow this option
on the command line. You don't usually need to specify this, as
\c
ld\c
is configured to expect as a default input format the most
usual format on each machine. \c
input-format\c
is a text string, the
name of a particular format supported by the BFD libraries.
\c
-format \c
input-format\c
\c
has the same effect, as does the script command
TARGET .
You may want to use this option if you are linking files with an unusual
binary format. You can also use \c
-b\c
to switch formats explicitly (when
linking object files of different formats), by including
\c
-b \c
input-format\c
\c
before each group of object files in a
particular format.
The default format is taken from the environment variable
GNUTARGET\c
. You can also define the input
format from a script, using the command \c
TARGET\c
.
-Bstatic
Do not link against shared libraries. This is only meaningful on
platforms for which shared libraries are supported.
-Bdynamic
Link against dynamic libraries. This is only meaningful on platforms
for which shared libraries are supported. This option is normally the
default on such platforms.
-Bsymbolic
When creating a shared library, bind references to global symbols to
the definition within the shared library, if any. Normally, it is
possible for a program linked against a shared library to override the
definition within the shared library. This option is only meaningful
on ELF platforms which support shared libraries.
-c commandfile
Directs \c
ld\c
to read link commands from the file
\c
commandfile\c
. These commands will completely override \c
ld\c
's
default link format (rather than adding to it); \c
commandfile\c
must
specify everything necessary to describe the target format.
You may also include a script of link commands directly in the command
line by bracketing it between `\|\c
{\c
\|' and `\|\c
}\c
\|' characters.
--cref
Output a cross reference table. If a linker map file is being
generated, the cross reference table is printed to the map file.
Otherwise, it is printed on the standard output.
-d
-dc
-dp
These three options are equivalent; multiple forms are supported for
compatibility with other linkers. Use any of them to make \c
ld
assign space to common symbols even if a relocatable output file is
specified (\c
-r\c
). The script command
\c
FORCE_COMMON_ALLOCATION\c
has the same effect.
-defsym symbol \fR = \fP expression
Create a global symbol in the output file, containing the absolute
address given by \c
expression\c
. You may use this option as many
times as necessary to define multiple symbols in the command line. A
limited form of arithmetic is supported for the \c
expression\c
in this
context: you may give a hexadecimal constant or the name of an existing
symbol, or use \c
+\c
and \c
-\c
to add or subtract hexadecimal
constants or symbols. If you need more elaborate expressions, consider
using the linker command language from a script.
--demangle
--no-demangle
These options control whether to demangle symbol names in error
messages and other output. When the linker is told to demangle, it
tries to present symbol names in a readable fashion: it strips leading
underscores if they are used by the object file format, and converts
C++ mangled symbol names into user readable names. The linker will
demangle by default unless the environment variable
COLLECT_NO_DEMANGLE
is set. These options may be used to override the default.
-e entry \c
Use \c
entry\c
as the explicit symbol for beginning execution of your
program, rather than the default entry point. See the `\|\c
ld\c
\|' entry in `\|\c
info\c
\|' for a
discussion of defaults and other ways of specifying the
entry point.
-embedded-relocs
This option is only meaningful when linking MIPS embedded PIC code,
generated by the
-membedded-pic
option to the GNU compiler and assembler. It causes the linker to
create a table which may be used at runtime to relocate any data which
was statically initialized to pointer values. See the code in
testsuite/ld-empic for details.
-E
-export-dynamic
When creating an ELF file, add all symbols to the dynamic symbol table.
Normally, the dynamic symbol table contains only symbols which are used
by a dynamic object. This option is needed for some uses of
dlopen.
-f name
--auxiliary name
When creating an ELF shared object, set the internal DT_AUXILIARY field
to the specified name. This tells the dynamic linker that the symbol
table of the shared object should be used as an auxiliary filter on the
symbol table of the shared object
name.
-F name
--filter name
When creating an ELF shared object, set the internal DT_FILTER field to
the specified name. This tells the dynamic linker that the symbol table
of the shared object should be used as a filter on the symbol table of
the shared object
name.
-format input-format
Synonym for \c
-b\c
\c
input-format\c
.
-g
Accepted, but ignored; provided for compatibility with other tools.
-G size \c
Set the maximum size of objects to be optimized using the GP register
to
size
under MIPS ECOFF. Ignored for other object file formats.
-h name
-soname name
When creating an ELF shared object, set the internal DT_SONAME field to
the specified name. When an executable is linked with a shared object
which has a DT_SONAME field, then when the executable is run the dynamic
linker will attempt to load the shared object specified by the DT_SONAME
field rather than the using the file name given to the linker.
--help
Print a summary of the command-line options on the standard output and exit.
This option and
--version
begin with two dashes instead of one
for compatibility with other GNU programs. The other options start with
only one dash for compatibility with other linkers.
-i
Perform an incremental link (same as option \c
-r\c
).
-l ar \c
Add an archive file \c
ar\c
to the list of files to link. This
option may be used any number of times. \c
ld\c
will search its
path-list for occurrences of \c
lib\c
ar\c
.a\c
for every \c
ar
specified.
-L searchdir
This command adds path \c
searchdir\c
to the list of paths that
\c
ld\c
will search for archive libraries. You may use this option
any number of times.
The default set of paths searched (without being specified with
\c
-L\c
) depends on what emulation mode \c
ld\c
is using, and in
some cases also on how it was configured. The
paths can also be specified in a link script with the \c
SEARCH_DIR
command.
-M
Print (to the standard output file) a link map diagnostic information
about where symbols are mapped by \c
ld\c
, and information on global
common storage allocation.
-Map mapfile \c
Print to the file
mapfile
a link map diagnostic information
about where symbols are mapped by \c
ld\c
, and information on global
common storage allocation.
-m emulation \c
Emulate the
emulation
linker. You can list the available emulations with the
--verbose
or
-V
options. This option overrides the compiled-in default, which is the
system for which you configured
ld .
-N
specifies readable and writable \c
text\c
and \c
data\c
sections. If
the output format supports Unix style magic numbers, the output is
marked as \c
OMAGIC\c
.
When you use the `\|\c
-N\c
\|' option, the linker does not page-align the
data segment.
-n
sets the text segment to be read only, and \c
NMAGIC\c
is written
if possible.
-noinhibit-exec
Normally, the linker will not produce an output file if it encounters
errors during the link process. With this flag, you can specify that
you wish the output file retained even after non-fatal errors.
-no-keep-memory
The linker normally optimizes for speed over memory usage by caching
the symbol tables of input files in memory. This option tells the
linker to instead optimize for memory usage, by rereading the symbol
tables as necessary. This may be required if the linker runs out of
memory space while linking a large executable.
-no-warn-mismatch
Normally the linker will give an error if you try to link together
input files that are mismatched for some reason, perhaps because they
have been compiled for different processors or for different
endiannesses. This option tells the linker that it should silently
permit such possible errors. This option should only be used with
care, in cases when you have taken some special action that ensures
that the linker errors are inappropriate.
-o output
output\c
is a name for the program produced by \c
ld\c
; if this
option is not specified, the name `\|\c
a.out\c
\|' is used by default. The
script command \c
OUTPUT\c
can also specify the output file name.
-O level
Generate optimized output files. This might use significantly more
time and therefore probably should be enabled only for generating the
final binary.
\c
level\c
is supposed to be a numeric value. Any value greater than zero enables
the optimizations.
-oformat output-format
Specify the binary format for the output object file.
You don't usually need to specify this, as
\c
ld\c
is configured to produce as a default output format the most
usual format on each machine. \c
output-format\c
is a text string, the
name of a particular format supported by the BFD libraries.
The script command
OUTPUT_FORMAT
can also specify the output format, but this option overrides it.
-R filename
Read symbol names and their addresses from \c
filename\c
, but do not
relocate it or include it in the output. This allows your output file
to refer symbolically to absolute locations of memory defined in other
programs.
-relax
An option with machine dependent effects. Currently this option is only
supported on the H8/300.
On some platforms, use this option to perform global optimizations that
become possible when the linker resolves addressing in your program, such
as relaxing address modes and synthesizing new instructions in the
output object file.
On platforms where this is not supported, `\|\c
-relax\c
\|' is accepted, but has no effect.
-r
Generates relocatable output i.e., generate an output file that can in
turn serve as input to \c
ld\c
. This is often called \c
partial
linking\c
. As a side effect, in environments that support standard Unix
magic numbers, this option also sets the output file's magic number to
\c
OMAGIC\c
.
If this option is not specified, an absolute file is produced. When
linking C++ programs, this option \c
will not\c
resolve references to
constructors; \c
-Ur\c
is an alternative.
This option does the same as \c
-i\c
.
-rpath\ \fIdirectory
Add a directory to the runtime library search path. This is used when
linking an ELF executable with shared objects. All
-rpath
arguments are concatenated and passed to the runtime linker, which uses
them to locate shared objects at runtime. The
-rpath
option is also used when locating shared objects which are needed by
shared objects explicitly included in the link; see the description of
the
-rpath-link
option. If
-rpath
is not used when linking an ELF executable, the contents of the
environment variable
LD_RUN_PATH
will be used if it is defined.
The
-rpath
option may also be used on SunOS. By default, on SunOS, the linker
will form a runtime search path out of all the
-L
options it is given. If a
-rpath
option is used, the runtime search path will be formed exclusively
using the
-rpath
options, ignoring
the
-L
options. This can be useful when using gcc, which adds many
-L
options which may be on NFS mounted filesystems.
-rpath-link\ \fIdirectory
When using ELF or SunOS, one shared library may require another. This
happens when an
ld\ -shared
link includes a shared library as one of the input files.
When the linker encounters such a dependency when doing a non-shared,
non-relocateable link, it will automatically try to locate the required
shared library and include it in the link, if it is not included
explicitly. In such a case, the
-rpath-link
option specifies the first set of directories to search. The
-rpath-link
option may specify a sequence of directory names either by specifying
a list of names separated by colons, or by appearing multiple times.
If the required shared library is not found, the linker will issue a
warning and continue with the link.
-S
Omits debugger symbol information (but not all symbols) from the output file.
-s
Omits all symbol information from the output file.
-shared
Create a shared library. This is currently only supported on ELF and
SunOS platforms (on SunOS it is not required, as the linker will
automatically create a shared library when there are undefined symbols
and the
-e
option is not used).
-sort-common
Normally, when
ld
places the global common symbols in the appropriate output sections,
it sorts them by size. First come all the one byte symbols, then all
the two bytes, then all the four bytes, and then everything else.
This is to prevent gaps between symbols due to
alignment constraints. This option disables that sorting.
-split-by-reloc\ \fIcount
Trys to creates extra sections in the output file so that no single
output section in the file contains more than
count
relocations.
This is useful when generating huge relocatable for downloading into
certain real time kernels with the COFF object file format; since COFF
cannot represent more than 65535 relocations in a single section.
Note that this will fail to work with object file formats which do not
support arbitrary sections. The linker will not split up individual
input sections for redistribution, so if a single input section
contains more than
count
relocations one output section will contain that many relocations.
-split-by-file
Similar to
-split-by-reloc
but creates a new output section for each input file.
-Tbss org \c
-Tdata org \c
-Ttext org \c
Use \c
org\c
as the starting address for respectively the
\c
bss\c
, \c
data\c
, or the \c
text\c
segment of the output file.
\c
org\c
must be a hexadecimal integer.
-T commandfile
Equivalent to \c
-c \c
commandfile\c
\c
; supported for compatibility with
other tools.
-t
Prints names of input files as \c
ld\c
processes them.
-u sym
Forces \c
sym\c
to be entered in the output file as an undefined symbol.
This may, for example, trigger linking of additional modules from
standard libraries. \c
-u\c
may be repeated with different option
arguments to enter additional undefined symbols.
-Ur
For anything other than C++ programs, this option is equivalent to
\c
-r\c
: it generates relocatable output i.e., an output file that can in
turn serve as input to \c
ld\c
. When linking C++ programs, \c
-Ur
will\c
resolve references to constructors, unlike \c
-r\c
.
--verbose
Display the version number for \c
ld
and list the supported emulations.
Display which input files can and can not be opened.
-v, -V
Display the version number for \c
ld\c
.
The
-V
option also lists the supported emulations.
--version
Display the version number for \c
ld
and exit.
-warn-common
Warn when a common symbol is combined with another common symbol or with
a symbol definition. Unix linkers allow this somewhat sloppy practice,
but linkers on some other operating systems do not. This option allows
you to find potential problems from combining global symbols.
-warn-constructors
Warn if any global constructors are used. This is only useful for a
few object file formats. For formats like COFF or ELF, the linker can
not detect the use of global constructors.
-warn-multiple-gp
Warn if the output file requires multiple global-pointer values. This
option is only meaningful for certain processors, such as the Alpha.
-warn-once
Only warn once for each undefined symbol, rather than once per module
which refers to it.
-warn-section-align
Warn if the address of an output section is changed because of
alignment. Typically, the alignment will be set by an input section.
The address will only be changed if it not explicitly specified; that
is, if the SECTIONS command does not specify a start address for the
section.
--whole-archive
For each archive mentioned on the command line after the
--whole-archive
option, include every object file in the archive in the link, rather
than searching the archive for the required object files. This is
normally used to turn an archive file into a shared library, forcing
every object to be included in the resulting shared library.
--no-whole-archive
Turn off the effect of the
--whole-archive
option for archives which appear later on the command line.
--wrap symbol
Use a wrapper function for
symbol.
Any undefined reference to
symbol
will be resolved to
__wrap_ symbol .
Any undefined reference to
__real_ symbol
will be resolved to
symbol.
-X
Delete all temporary local symbols. For most targets, this is all local
symbols whose names begin with `\|\c
L\c
\|'.
-x
Delete all local symbols.
ENVIRONMENT
\c
You can change the behavior of
ld\c
with the environment variable \c
GNUTARGET\c
.
\c
GNUTARGET\c
determines the input-file object format if you don't
use \c
-b\c
(or its synonym \c
-format\c
). Its value should be one
of the BFD names for an input format. If there is no
\c
GNUTARGET\c
in the environment, \c
ld\c
uses the natural format
of the host. If \c
GNUTARGET\c
is set to \c
default\c
then BFD attempts to discover the
input format by examining binary input files; this method often
succeeds, but there are potential ambiguities, since there is no method
of ensuring that the magic number used to flag object-file formats is
unique. However, the configuration procedure for BFD on each system
places the conventional format for that system first in the search-list,
so ambiguities are resolved in favor of convention.
SEE ALSO
objdump( 1 ) ` | ld |' and ` | binutils |' entries in info c ld: the GNU linker c Steve Chamberlain and Roland Pesch; The GNU Binary Utilities c Roland H Pesch
COPYING
Copyright (c) 1991, 92, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
are preserved on all copies.
Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.
Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that this permission notice may be included in
translations approved by the Free Software Foundation instead of in
the original English.
|
|
