Next
Previous
Contents
While PPP is used for Internet access you also need a dialer
program (or script) that will dial a phone number and then start PPP
once a connection is made. When the other side answers the phone,
then three things happen: a modem connection is established (CONNECT),
PPP is started at both ends, and you get logged in automatically. The
exact sequence of the last 2 events may vary. Dialer programs for ppp
include wvdial, chap scripts, kppp, RP3 (front end to wvdial and
ifup), gnome-ppp, and "modem lights" (Gnome). Linuxconf configures
some dialers.
There are also older dialer programs which can dial out (via a modem)
but don't connect to the Internet. Instead, you get connected to a
computer somewhere that puts a text image on your screen. This was
much used in the past to connect to Bulletin Boards. See
PCs and BBSs Today, it might be used to connect to
a remote computer that you may login to (including a PC at home).
Programs for this are: minicom (the most popular), Seyon
(X-Windows only) and Kermit . Some people have likely also used
these programs for dialing out with ppp for the Internet but it's not
what they were originally designed for.
Minicom is only a communications program while Kermit is both a
communications program and a file transfer protocol. But one may use
the Kermit protocol from within Minicom (provided one has Kermit
installed on one's PC). Minicom is menu based while Kermit is
command line based (interactive at the special Kermit prompt). While
the Kermit program is free software, the documentation is not all
free. There is no detailed manual supplied and it is suggested that
you purchase a book as the manual. However Kermit has interactive
online help which tells all but lacks tutorial explanations for the
beginner. Commands may be put in a script file so you don't have to
type them over again each time. Kermit (as a communications program)
is more powerful than Minicom.
Although all Minicom documentation is free, it's not as extensive as
Kermit's. In my opinion it's easier to set up Minicom, there is less
to learn, and you can still use kermit from within Minicom. But if
you want to write a script for automatically doing file transfers,
etc. Kermit is better.
g-kermit is a gpled kermit which has no dialout capabilities.
Here is a list of some communication software you can choose from,
If they didn't come with your distribution they should be available
via FTP. I would like comparative comments on the dialout programs.
Are the least popular ones obsolete?
Least Popular Dialout
ecu - a communications program
pcomm - procomm -like communications program with zmodem
xc - xcomm communication package
Most Popular Dialout
- PPP dialers for getting on the internet:
wvdial , eznet ,
chat , pon (uses chat),
minicom - telix -like communications program. Can work
with scripts, zmodem, kermit
-
C-Kermit -
portable, scriptable, serial and TCP/IP communications including file
transfer, character-set translation, and zmodem support
seyon - X based communication program
Fax
By using a fax program, you may use most modems to send faxes.
In this case you dial out directly and not via ppp and an ISP. You
also pay any long-distance telephone charges. email is more
efficient.
Voicemail Software
- vgetty is an extension to mgetty that handles voicemail for
some modems. It should come with recent releases of mgetty.
-
VOCPis a
"complete voice messaging" system for Linux.
Dial-in (uses getty)
mgetty+fax is for modems and is well documented (except for
voicemail as of early 1999). It also handles fax stuff and provides
an alternative to uugetty . It's incorporating voicemail (using
vgetty) features. See
About mgetty
-
uugetty is also for modems. It comes as a part of the
ps_getty package. See
About getty_ps
Network Connection
Other
SLiRP and term are programs which are of use if you only
have a dial-up shell account on a Unix-like machine and want to get
the equivalent of a PPP account (or the like) without being authorized
to have it (possibly because you don't want to pay extra for it, etc.).
SLiRP is more popular than term which is almost obsolete.
To use SLiRP you install it in your shell account on the remote
computer. Then you dial up the account and run SLiRP on the remote
and PPP on your local PC. You now have a PPP connection over which
you may run a web browser on your local PC such as Netscape, etc.
There may be some problems as SLiRP is not as good as a real PPP
account. Some accounts may provide SLiRP since it saves on IP
addresses (You have no IP address while using SLiRP).
term is something like SLiRP only you need to run term on
both the local and remote computer. There is no PPP on the phone line
since term uses its own protocol. To use term from your PC
you need to use a term-aware version of ftp to do ftp, etc. Thus it's
easier to use SLiRP since the ordinary version of ftp works fine with
SLiRP. There is an unmaintained Term HOWTO.
If you want someone who uses MS Windows to dial in to your Linux
PC then if they use:
- Windows 3.x: use
Terminal
- Windows 95/98/2000: use
HyperTerminal
Third party dial-out programs include HyperTerminal Private Edition.
Next
Previous
Contents
|