4. Downloading Your First Image (In 5 Easy Steps)
We'll assume that you're starting from scratch and don't have any Debian ISOs on hand. Once
you burn your set of ISOs, you can use jigdo-lite later to update them. We'll cover updating your
ISOs in the next section.
4.1. Install Jigdo
First install the jigdo-file package:
# apt-get install jigdo-file
|
Jigdo is under aggressive development. Bug fixes and enhancements are constant, so if
you're using stable or testing, download jigdo-file from unstable at http://packages.debian.org/unstable/utils/jigdo-file.html. As of 28 Nov 2005 it's at
version 0.7.2-2.
4.2. Download The .template And .jigdo Files
For each ISO image you want to download, you'll need both the .jigdo and .template file
for that image. Both files follow the same naming convention:
distro-arch-n.jigdo
distro-arch-n.template
|
where distro is the name of the distro (like "sarge"), arch is the architecture (like
"i386") and n is the disk number (like "1").
For example, sarge has 8 images, so you need to download 8 .jigdo files and 8 .template
files. They can be downloaded from http://www.debian.org/CD/jigdo-cd/. The first .jigdo and .template file are named
sarge-i386-1.jigdo and sarge-i386-1.template
respectively.
4.3. Run jigdo-lite
Run jigdo-lite and give it the .jigdo
file of the image you want to download. Using Sarge as an example:
lucifer$ ls
sarge-i386-1.jigdo sarge-i386-1.template
lucifer$ jigdo-lite sarge-i386-1.jigdo
Jigsaw Download "lite"
Copyright 2001-2003 by Richard Atterer <jigdo@atterer.net>
Getting mirror information from /etc/apt/sources.list
-----------------------------------------------------------------
Images offered by `sarge-i386-1.jigdo':
1: 'Debian GNU/Linux testing "Sarge"
- Official Snapshot i386 Binary-1 CD' (sarge-i386-1.iso)
Further information about `sarge-i386-1.iso':
Generated on Fri, 7 Feb 2003 20:31:28 -0700
-----------------------------------------------------------------
If you already have a previous version of the CD you are
downloading, jigdo can re-use files on the old CD that are also
present in the new image, and you do not need to download them
again. Mount the old CD ROM and enter the path it is mounted under
(e.g. `/mnt/cdrom').
Alternatively, just press enter if you want to start downloading
the remaining files.
Files to scan:
|
If you suspended jigdo-lite with control+z
(don't do this; I'll tell you what you'd see) and looked at the output of
ls, you'd find a new file in the directory named
sarge-i386-1.jigdo.unpacked. It turns out that .jigdo files are gzip'ed.
This file is simply a gunzip'ed version of the .jigdo file.
Right now, jigdo-lite is telling us that if we have an
outdated version of first CD of sarge, we should give the pathname to the CD. This is how you
update your ISO images (or complete your incomplete downloads). Since we're assuming that
you're starting from scratch and have no Debian ISOs yet, we have nothing to scan. We'll
cover this in Section 5, so just press ENTER.
See also Section 7.2, "More About Scan Sources".
4.4. Specify A Mirror
You'll see:
-----------------------------------------------------------------
The jigdo file refers to files stored on Debian mirrors. Please
choose a Debian mirror as follows: Either enter a complete URL
pointing to a mirror (in the form
`ftp://ftp.debian.org/debian/'), or enter any regular expression
for searching through the list of mirrors: Try a two-letter
country code such as `de', or a country name like `United
States', or a server name like `sunsite'.
Debian mirror [http://linux.csua.berkeley.edu/debian/]:
|
By default, jigdo-lite pulls the mirror from your
/etc/apt/sources.list. If you want to use a different mirror, you would
specify a different mirror here. If this is the mirror you want to use, press
ENTER. Jigdo-lite will then write a .jigdo-lite file in
your home directory.
Next, if the .jigdo file you're using references a package which
needs to be downloaded from a Non-US server, jigdo-lite will prompt
you for a Debian Non-US mirror. The message displayed (and your response) will be very
similar to the mirror dialog in the previous paragraph.
-----------------------------------------------------------------
The jigdo file also refers to the Non-US section of the Debian
archive. Please repeat the mirror selection for Non-US. Do not
simply copy the URL you entered above; this does not work because
the path on the servers differs!
Debian non-US mirror [http://linux.csua.berkeley.edu/debian-non-US//]:
|
Jigdo-lite will write your choice to ~/.jigdo-lite. However, if
the image you're about to download doesn't contain Non-US software you won't see this
dialog.
If you want to change the default mirrors you use with jigdo at any time in the future,
you can modify these two lines in ~/.jigdo-lite:
debianMirror='http://some-mirror-to-use/debian/'
nonusMirror='http://some-other-mirror/debian-non-US/'
|
4.5. Downloading Of The ISO
After you specify the mirror(s), jigdo-lite will begin
downloading files to assemble the ISO image:
Not downloading .template file - `sarge-i386-1.template' already present
-----------------------------------------------------------------
Merging parts from `file:' URIs, if any...
Found 0 of the 826 files required by the template
Will not create image or temporary file - try again with different input files
--09:35:12-- http://mirror/debian/pool/main/p/pack/pack_3.10-1_i386.deb
=> `sarge-i386-1.iso.tmpdir/mirror/debian/pool/main/p/pack/pack_3.10-1_i386.deb
Resolving linux.csua.berkeley.edu... done.
Connecting to linux.csua.berkeley.edu[128.32.112.231]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1,911,624 [application/x-debian-package]
19% [======> ] 378,304 149.87K/s ETA 00:09
|
There'll be a lot of messages flying across your screen; if this is confusing to you,
see Section 6.13. While jigdo-lite is downloading the packages, switch to
another console (or open another xterm) and do an ls in the directory
you're running jigdo-lite in. Now there should be 6 files in the directory:
The sarge-i386-1.iso.tmpdir/ directory contains
all the Debian packages that jigdo-lite downloads. Every so often,
the directory gets flushed and the files get written to
sarge-i386-1.iso.tmp, which is an temporarily incomplete version of the
ISO image you want. Note that sarge-i386-1.iso.tmp won't appear until
the first time sarge-i386-1.iso.tmpdir/ gets
flushed.
jigdo-file-cache.db is a Berekeley DB file containing md5sums of
any files read in when you specify a directory at the Files to scan:
prompt. It's described in Section 7.3.
At this point, go play some Quake III because this will take some time (you may want to
play on a different machine because jigdo is very disk intensive when it flushes files to the
.iso.tmp file). At some point, the download will finish and you'll be
staring at:
FINISHED --13:32:58--
Downloaded: 7,469,872 bytes in 9 files
Found 9 of the 9 files required by the template
Successfully created `sarge-i386-3.raw'
-----------------------------------------------------------------
Finished!
The fact that you got this far is a strong indication that `sarge-i386-3.raw'
was generated correctly. I will perform an additional, final check,
which you can interrupt safely with Ctrl-C if you do not want to wait.
OK: Checksums match, image is good!
|